all published data at t case = 25c unless otherwise indicated esd: electrostatic discharge sensitive deviceobserve handling precautions! 4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 PTMC210124MD package pg-hb1dso-14-1 (formed leads) wideband ldmos two-stage integrated power amplifer 12 w, 28 v, 1805 C 2200 mhz features ? on-chip matching for broadband operation ? typical cw performance, 2170 mhz, 28 v, com- bined outputs - output power at p 1db = 12 w - gain = 30.5 db - effciency = 51.9% ? capable of handling 10:1 vswr @28 v, 12 w (cw) output power ? integrated esd protection ? human body model class 0b (per ansi/esda/ jedec js-001) ? integrated temperature compensation ? pb-free and rohs-compliant description the PTMC210124MD is a wideband, two-stage, ldmos integrated power amplifer. it incorporates internal matching for operation from 1805 mhz to 2200 mhz, and dual independent outputs with 6 w of output power each. it is available in a 14-lead plastic overmold pack - age with gull wing leads. rf characteristics single-carrier wcdma specifications (tested in wolfspeed production test fixture) v dd = 28 v, i dq1a = i dq1b = 17 ma , i dq2a = i dq2b = 73 ma , p out = 1.38 w avg, ? = 2170 mhz, 3gpp wcdma signal, channel bandwidth = 3.84 mhz, peak/average = 7.5 db @ 0.01% ccdf characteristic symbol min typ max unit gain g ps 29 30.5 db drain effciency h d 15 16.5 % adjacent channel power ratio acpr C49.5 C47 dbc 0 15 30 45 60 0 10 20 30 40 28 30 32 34 36 38 40 42 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single - carrier wcdma drive - up v dd = 28 v, i dq1a + i dq1b = 34 ma, i dq2a + i dq2b = 148 ma, ? = 2170 mhz, 3gpp wcdma signal, par = 7.5 db, 3.84 mhz bw par @ 0.01% ccdf gain efficiency PTMC210124MD_g1 PTMC210124MD
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 2 ptma210124md dc characteristics (each side) stage 1 conditions symbol min typ max unit drain leakage current v ds = 28 v, v gs = 0 v i dss 0.1 a v ds = 60 v, v gs = 0 v i dss 1 a gate leakage current v gs = 1 v, v ds = 0 v i gss 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) 10 ? operating gate voltage v ds = 28 v, i dq1a = i dq1b = 17 ma v gs1 2.7 v fixture operating gate voltage v ds = 28 v, i dq1a = i dq1b = 17 ma v gs1 4.9 v stage 2 conditions symbol min typ max unit drain leakage current v ds = 28 v, v gs = 0 v i dss 0.1 a v ds = 60 v, v gs = 0 v i dss 1 a gate leakage current v gs = 1 v, v ds = 0 v i gss 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) 1.9 ? operating gate voltage v ds = 28 v, i dq2a = i dq2b = 73 ma v gs2 2.7 v fixture opererating gate voltage v ds = 28 v, i dq2a = i dq2b = 73 ma v gs2 4.9 v maximum ratings parameter symbol value unit drain-source voltage v dss 65 v gate-source voltage v gs C6 to +10 v junction temperature t j 225 c storage temperature range t stg C65 to +150 c operating voltage v dd 0 to 32 v operation above the maximum values listed here may cause permanent damage. maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the component. exposure to absolute maximum rating conditions for extended periods may affect device reliability. for reliable continuous operation, the device should be operated within the operating voltage range (v dd ) specifed above. thermal characteristics characteristic symbol value unit thermal resistance stage 1 (t case = 70c, 12 w cw) r q jc 4.8 c/w stage 2 (t case = 70c, 12 w cw) r q jc 1.9 c/w
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 3 ptma210124md moisture sensitivity level level test standard package temperature unit 3 ipc/jedec j-std-020 260 c ordering information type and version order code package description shipping PTMC210124MD v1 r5 PTMC210124MD-v1-r5 pg-hb1dso-14-1 tape & reel, 500 pcs
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 4 ptma210124md typical performance (data taken in production test fixture) 0 5 10 15 20 25 30 10 15 20 25 30 35 40 2100 2120 2140 2160 2180 2200 efficiency (%) gain (db) frequency (mhz) single - carrier wcdma broadband performance v dd = 28 v, i dq1a + i dq1b = 34 ma, i dq2a + i dq2b = 148 ma, p out = 31.4 dbm, 3gpp wcdma signal, par = 7.5 db efficiency gain PTMC210124MD_g3 -55 -50 -45 -40 -35 2100 2120 2140 2160 2180 2200 acp (dbc) frequency (mhz) single - carrier wcdma broadband performance v dd = 28 v, i dq1a + i dq1b = 34 ma, i dq2a + i dq2b = 148 ma, p out = 31.4 dbm, 3gpp wcdma signal, par = 7.5 db acp low acp up PTMC210124MD_g4 0 15 30 45 60 0 10 20 30 40 26 28 30 32 34 36 38 40 42 efficiency (%) gain (db) output power (dbm) cw performance v dd = 28 v, , i dq1a + i dq1b = 34 ma, i dq2a + i dq2b = 148 ma PTMC210124MD_g5 2200mhz gain 2200mhz eff 2170mhz gain 2170mhz eff 2140mhz gain 2140mhz eff 2110mhz gain 2110mhz eff 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 28 30 32 34 36 38 40 42 efficiency(%) acp up & low (dbc) average output power (dbm) single - carrier wcdma drive - up v dd = 28 v, i dq1a + i dq1b = 34 ma, i dq2a + i dq2b = 148 ma, ? = 2170 mhz, 3gpp wcdma signal, par = 7.5 db, bw = 3.84 mhz acp up acp low efficiency PTMC210124MD_g2
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 5 ptma210124md typical performance (cont.) load pull performance cw signal: v dd = 28 v, i dq1a = i dq1b = 17 ma , i dq2a = i dq2b = 74 ma p 1db max output power max pae freq [mhz] zs [ ?] z l [ ? ] gain [db] p 1db [dbm] p 1db [w] pae [%] z l [ ? ] gain [db] p 1db [dbm] p 1db [w] pae [%] 1805 49.8+j2.25 28.5+j0.97 29.2 39.5 9.0 53.4 36.1+j19.6 30.6 38.4 6.9 58.8 1960 49.9-j0.12 24.0+j4.31 30.1 39.4 8.6 53.4 21.8+j16.3 31.3 38.5 7.1 58.4 2180 48.5-j1.88 19.5+j3.58 29.0 39.5 8.9 51.5 12.0+j13.7 30.7 38.0 6.3 58.4 2200 49.3+j1.0 18.7+j4.81 29.0 39.5 8.9 53.6 12.3+j12.4 30.3 38.3 6.7 59.1 -40 -30 -20 -10 20 25 30 35 1800 1900 2000 2100 2200 input return loss (db) gain (db) frequency (mhz) small signal cw gain & input return loss v dd = 28 v, i dq1a + i dq1b = 34 ma, i dq2a + i dq2b = 148 ma input return loss gain PTMC210124MD_g6
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 6 ptma210124md reference circuit, 2110 C 2200 mhz reference circuit assembly diagram (not to scale) reference circuit assembly dut PTMC210124MD v1 test fixture part no. ltn/PTMC210124MD v1 pcb rogers 4350, 0.508 mm [0.020] thick, 2 oz. copper, r = 3.66, ? = 2110C 2200 mhz find gerber files for this test fixture on the wolfspeed web site at www.wolfspeed.com/rf components information component description manufacturer p/n c101, c103, c105, c107, c109, c111, c203, c207 capacitor, 4.7 f murata electronics north america grm32er71h475ka88l c102, c104, c106, c108, c110, c112, c202, c206 capacitor, 10 f taiyo yuden umk325c7106mm-t c201, c204, c205, c208 capacitor, 10 pf atc atc800a100jt250t r101, r103 resistor, 0.0 ohms panasonic electronic components erj-3gey0r00v r102, r201 resistor, 50 ohms anaren c8a50z4a r104, r105, r106, r107 resistor, 1k ohms panasonic electronic components erj-8geyj102v r108, r109, r110, r111 resistor, 4.3k ohms panasonic electronic components erj-8geyj432v u1, u2 hybrid coupler anaren x3c21p1-03s c201 r111 c110 c203 c207 c206 r104 r108 c202 c205 c111 c204 c208 r201 c112 r105 r109 c104 c103 c102 c101 r101 r102 c105 c106 r103 c108 c107 c109 r107 r110 r106 PTMC210124MD_03b 2p1g, v2p0 rf_in rf_out v g1b p t m c 2 1 0 1 2 4 m d _ c d _ 0 5 - 1 9 - 2 0 1 8 ro4350, 20 mil, 2 oz u1 v g1a v g2a v g2b v d1b v d1a v d2a v d2b u2
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 7 ptma210124md pinout diagram (top view) vd2/rfout b vd1 a vg2 a vg1 a rfin a n/c n/c n/c n/c rfin b vg1 b vg2 b vd1b vd2/rfout a 1 2 3 4 5 6 7 8 9 10 11 12 14 13 p t m c 2 1 0 2 0 4 m d _ p d _ 5 - 2 - 2 0 1 6 source: plated copper heat slug on back - side of package vd2/rf out a vd2/rf out b rf in a rf in b
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 8 ptma210124md package outline specifications package pg-hb1dso-14-1 (formed leads) 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 03, 2018-05-19 9 ptma210124md package outline specifications package pg-hb1dso-14-1 (formed leads, bottom view) 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
|
